Inspection
Frame condition
Inspect the frame, fork, welds, and high-stress areas for cracks, dents, or prior repairs.
GT
2018 GT JPL Team Comp
Previous used estimate
$119 - $123
Actual value depends on condition, size, and local demand.
Value Guide market data · 2018 GT JPL Team Comp
12-month projected trend
— %
Direction and magnitude, not judgment
vs. category average
6%
Drops faster than category avg
Price over time - 2018 GT JPL Team Comp
Values based on actual sales data. Enter your bike's specifics to get a precise valuation.
All JPL model years
Compare JPL Team Comp models
1 modelsChoose a different build or frame style to see its value.
Overview
About this bike
Jason Phelan's fluid style and entertaining approach to riding enable him to achieve anything he can dream up. GT's left-side drive JPL Team is designed with that ability in mind. While young, Jason learned that his bike could take him anywhere and it has been his aim to remind riders that they are only limited by their imagination. So grab your JPL and set off on an adventure.
Specifications
- Subtype
- BMX
- Category
- BMX
- Component Fork
- GT FS design, Cr-Mo 1pc. threaded steerer, 31.8- 28.6mm tapered O.D. blades, 31mm offset
- Component Hubs
- Front: Alloy body, sealed bearings Rear: LHD alloy body, 5pc sealed bearings
- Component Size
- 20.75-inch
- Component Stem
- New GT Top Load, 1-1/8" steerer clamp, cold forged cap, 32mm rise, 50mm length
- Product Family
- JPL
- Component Chain
- KMC Z410
- Component Color
- Clear
- Component Frame
- GT FS design, Cr-Mo front triangle, downtube gusset, mid BB, integrated headset design, removable rotor tabs, Odyssey Springfield brake-compatible
- Component Brakes
- Rear: Aluminum U-brake w/ soft compound pad
- Component Pedals
- GT Low Profile FS platform design, PP material, Cr-Mo axle
- Component Saddle
- GT Pivotal Padded
- Component Headset
- 1-1/8" Integrated design, 45x45 degree sealed bearings
- Component Crankset
- GT Power Series Tubular Cr-Mo 3pc, LHD, 170mm Arms, Cold Forged Cr-Mo 19mm x 8-spline
- Component Handlebar
- GT Freestyle 2pc. steel, 9"H x 29"W, 3° up, 11° back
- Component Seat Post
- Alloy Pivotal 25.4 x 200mm
- Component Chainrings
- 25T GT 5mm aluminum
- Component Front Tire
- GT LP-5 20x2.35
- Component Tape Grips
- GT Super Soft 155mm single compound w/o flange w/ GT removable plug
- Component Brake Levers
- Hinged Alloy
- Component Bottom Bracket
- MID sealed bearing
- Hubs
- Front: Alloy body, sealed bearings Rear: LHD alloy body, 5pc sealed bearings
- Crankset
- GT Power Series Tubular Cr-Mo 3pc, LHD, 170mm Arms, Cold Forged Cr-Mo 19mm x 8-spline
- Pedals
- GT Low Profile FS platform design, PP material, Cr-Mo axle
- Bottom Bracket
- MID sealed bearing
- Chain
- KMC Z410
- Saddle
- GT Pivotal Padded
- Handlebar
- GT Freestyle 2pc. steel, 9"H x 29"W, 3° up, 11° back
- Headset
- 1-1/8" Integrated design, 45x45 degree sealed bearings
- Stem
- New GT Top Load, 1-1/8" steerer clamp, cold forged cap, 32mm rise, 50mm length
- Brake Levers
- Hinged Alloy
- Brakes
- Rear: Aluminum U-brake w/ soft compound pad
- Chainrings
- 25T GT 5mm aluminum
- Fork
- GT FS design, Cr-Mo 1pc. threaded steerer, 31.8- 28.6mm tapered O.D. blades, 31mm offset
- Frame
- GT FS design, Cr-Mo front triangle, downtube gusset, mid BB, integrated headset design, removable rotor tabs, Odyssey Springfield brake-compatible
- Seat Post
- Alloy Pivotal 25.4 x 200mm
- Tape/Grips
- GT Super Soft 155mm single compound w/o flange w/ GT removable plug
- Color
- Clear
- Size
- 20.75-inch
- Front Tire
- GT LP-5 20x2.35
What to check when buying used
Inspection
Drivetrain wear
Check chain stretch, cassette teeth, chainrings, and shifting under load before negotiating price.
Inspection
Service history
Ask for service records covering bearings, brakes, drivetrain, and any frame or fork warranty work.