Inspection
Frame condition
Inspect the frame, fork, welds, and high-stress areas for cracks, dents, or prior repairs.
Haro
2022 Haro Lineage Ground Master 2021
Previous used estimate
$635 - $654
Actual value depends on condition, size, and local demand.
Value Guide market data · 2022 Haro Lineage Ground Master 2021
12-month projected trend
15%
Direction and magnitude, not judgment
vs. category average
5%
Drops faster than category avg
Price over time - 2022 Haro Lineage Ground Master 2021
Values based on actual sales data. Enter your bike's specifics to get a precise valuation.
All Lineage model years
Compare Lineage Ground Master 2021 models
1 modelsChoose a different build or frame style to see its value.
Overview
About this bike
The Lineage Ground Master was created to take a DNA strand or two from our past and thread it into state of the art contemporary designs of the present. Look at this masterpiece, from a glance it's difficult to tell from the original 30 years prior. But when you look closely, you will see all modern technology. Hourglass Mid BB, internal headset. Forks are full heat treated and butted same as the Kneesaver bars and 48 spline 19mm cranks. This bike is as high-level BMX you are going to buy in today's market. - 100% chromoly Lineage Ground Master frame with twin top tube, hour glass Mid BB shell, integrated head tube, and Lineage dropouts—19.5" top tube length - 100% heat-treated chromoly Lineage fork with CNC 1 piece internal threaded steer tube, integrated bearing race, tapered legs, 15mm offset dropouts and 990 brake mounts with internal brake cable routing - 100% heat treated and butted chromoly Lineage Kneesaver bars 8.5" with Fusion Lineage CNC alloy top load stem - Lineage heat treated 3-piece chromoly 48-spline 175mm cranks with Haro Lineage Fusion Disc 28T CNC alloy bolt drive sprocket and sealed Mid BB - 25/9 gearing - Fully sealed wheels with Lineage high flange hubs with free coaster rear and double-wall alloy rims - Haro HPF 100 psi tires 20 x 2.0" front and rear - Haro Lineage padded Pivotal stealth seat with alloy Lineage Pivotal post - Haro Fusion pedals - CNC alloy pegs - CNC alloy gyro with Teflon bearing - Haro Team grips - KMC K710SL super light chain - Dia-Compe "Hombre" FS996 brakes with Tech 77 levers front and rear - Haro Lineage alloy twin torque seat post clamp
Specifications
- Subtype
- BMX
- Category
- BMX
- Component Fork
- Haro La Bastille fork with (removable) 990 mounts and internal cable routing; 15mm offset; 3/8" axle; fluted one piece cnc cr-mo steerer; tapered fluted legs
- Component Hubs
- Front: 48h alloy hub body; 3/8"x100wx155l; crmo 155mm straight axle; 2 sealed bearings Rear: Freecoaster hub (male bolt); sealed bearings; 9t driver; 17mm steel flange axle nuts; all hardware in cp finish including cone nuts, axle nuts
- Component Rims
- Fusion by Odyssey model litehouse 20x1.75"; 48h; (w200) (double wall welded joint)
- Component Size
- 19.5-inch
- Component Stem
- Haro Lineage fusion top load stem; T6 alloy; cold forged with cnc; 45mm
- Product Family
- Lineage
- Component Chain
- KMC K1Sl; 1/2 x 1/8; Narrow Silver Super Lite
- Component Color
- Chrome
- Component Frame
- Lineage ground master frame - 19.5" full crmo; internal h/t crmo - with removable rotor tab mounting holes; removable brake mounts.
- Component Brakes
- Dia-Compe fs996 "hombre" u-brake; cold forged aluminum arms; dual spring tension adjustment w/anchor bolt parts
- Component Pedals
- Haro Fusion; alloy pedal body; crmo axle
- Component Rotors
- Teflon bearing gyro - full cnc 6061 t6 included a-plate
- Component Saddle
- Haro Fusion slim stealth pivotal seat
- Component Headset
- Sealed Integrated, 1 1/8"
- Component Crankset
- Haro group one cranks (bolt drive interface) rsd and lsd; 165; 165mm; 19mm od 48-spline spindle; heat treated 4130
- Component Seatpost
- Haro Fusion stealth pivotal seat post; 25.4 x 300mm
- Component Handlebar
- Lineage kneesaver bar 8.5"; 100% heat treated; multi-butted
- Component Rear Tire
- Haro HPF tire; 20x2.00; 60 100 max psi
- Component Front Tire
- Haro HPF tire; 20x2.00; 60 100 max psi
- Component Tape Grips
- Haro team grip; 145mm length x 29mm diameter; 50mm od flange (low); kraton a15 material (super soft).
- Component Brake Levers
- Dia-Compe "tech-77" lever without stopper; right and left side; diecast aluminum bracket with hinged clamp; cold forged aluminum lever
- Component Bottom Bracket
- Sealed MID BB
- Component Accessories Extras
- 6061 alloy pegs; 34mm od; 110mm length; include 4 total pegs
- Hubs
- Front: 48h alloy hub body; 3/8"x100wx155l; crmo 155mm straight axle; 2 sealed bearings Rear: Freecoaster hub (male bolt); sealed bearings; 9t driver; 17mm steel flange axle nuts; all hardware in cp finish including cone nuts, axle nuts
- Rims
- Fusion by Odyssey model litehouse 20x1.75"; 48h; (w200) (double wall welded joint)
- Crankset
- Haro group one cranks (bolt drive interface) rsd and lsd; 165; 165mm; 19mm od 48-spline spindle; heat treated 4130
- Pedals
- Haro Fusion; alloy pedal body; crmo axle
- Bottom Bracket
- Sealed MID BB
- Chain
- KMC K1Sl; 1/2 x 1/8; Narrow Silver Super Lite
- Seatpost
- Haro Fusion stealth pivotal seat post; 25.4 x 300mm
- Saddle
- Haro Fusion slim stealth pivotal seat
- Handlebar
- Lineage kneesaver bar 8.5"; 100% heat treated; multi-butted
- Headset
- Sealed Integrated, 1 1/8"
- Rear Tire
- Haro HPF tire; 20x2.00; 60 100 max psi
- Stem
- Haro Lineage fusion top load stem; T6 alloy; cold forged with cnc; 45mm
- Accessories & Extras
- 6061 alloy pegs; 34mm od; 110mm length; include 4 total pegs
- Brake Levers
- Dia-Compe "tech-77" lever without stopper; right and left side; diecast aluminum bracket with hinged clamp; cold forged aluminum lever
- Brakes
- Dia-Compe fs996 "hombre" u-brake; cold forged aluminum arms; dual spring tension adjustment w/anchor bolt parts
- Fork
- Haro La Bastille fork with (removable) 990 mounts and internal cable routing; 15mm offset; 3/8" axle; fluted one piece cnc cr-mo steerer; tapered fluted legs
- Frame
- Lineage ground master frame - 19.5" full crmo; internal h/t crmo - with removable rotor tab mounting holes; removable brake mounts.
- Tape/Grips
- Haro team grip; 145mm length x 29mm diameter; 50mm od flange (low); kraton a15 material (super soft).
- Color
- Chrome
- Size
- 19.5-inch
- Rotors
- Teflon bearing gyro - full cnc 6061 t6 included a-plate
- Front Tire
- Haro HPF tire; 20x2.00; 60 100 max psi
What to check when buying used
Inspection
Drivetrain wear
Check chain stretch, cassette teeth, chainrings, and shifting under load before negotiating price.
Inspection
Service history
Ask for service records covering bearings, brakes, drivetrain, and any frame or fork warranty work.