Inspection
Frame condition
Inspect the frame, fork, welds, and high-stress areas for cracks, dents, or prior repairs.
Haro
2022 Haro Lineage Sport Bashguard 2021
Previous used estimate
$635 - $654
Actual value depends on condition, size, and local demand.
Value Guide market data · 2022 Haro Lineage Sport Bashguard 2021
12-month projected trend
15%
Direction and magnitude, not judgment
vs. category average
5%
Drops faster than category avg
Price over time - 2022 Haro Lineage Sport Bashguard 2021
Values based on actual sales data. Enter your bike's specifics to get a precise valuation.
All Lineage Sport Bashguard model years
Compare Lineage Sport Bashguard 2021 models
1 modelsChoose a different build or frame style to see its value.
Overview
About this bike
The Lineage Sport Bashguard was created to take a DNA strand or two from our past and thread it into state of the art contemporary designs of the present. Look at this masterpiece, from a glance it's difficult to tell from the original 30 years prior. But when you look closely, you will see all modern technology. Investment cast dropouts, Mid BB, internal headset. Forks are full CNC heat treated and butted same as the Kneesaver bars and alloy 22mm cranks. This bike is as high-level BMX you are going to buy in today's market. - 100% chromoly Lineage Sport frame with platform, Mid BB shell, integrated head tube, and Lineage cast dropouts with integrated chain tensioners—21" top tube length - 100% heat treated chromoly Lineage fork with CNC 1 piece internal threaded steer tube, integrated bearing race, tapered legs, investment cast dropouts, and 990 brake mounts with internal brake cable routing - 100% heat treated and butted chromoly Lineage Kneesaver bars 8.5" with Haro Lineage CNC alloy top load stem - Lineage heat treated 3-piece alloy 175mm cranks with Haro Lineage Fusion Disc 39T CNC alloy bolt drive sprocket and sealed Mid BB - 39/14 gearing - Fully sealed wheels with Lineage high flange hubs and double-wall alloy rims - Haro HPF 100 psi tires 20 x 2.2" front and rear - Haro Lineage padded Pivotal stealth Fusion seat with alloy Lineage Pivotal fluted post - Haro Fusion alloy pedals - CNC alloy pegs - CNC alloy gyro with Teflon bearing - Haro Team grips - KMC K710SL super light chain - Dia-Compe "Hombre" FS996 brakes with Tech 77 levers front and rear - Haro Lineage alloy seat post clamp
Specifications
- Subtype
- BMX
- Category
- BMX
- Component Fork
- Haro Lineage fork with 990 mounts and internal cable routing; 33mm offset; 3/8" axle; fluted one piece cnc cr-mo steerer; tapered fluted legs with Investment cast dropouts
- Component Hubs
- Front: 48h alloy hub body; 3/8"x100wx155l; crmo 155mm straight axle; 2 sealed bearings Rear: Cassette hub (male bolt); sealed bearings; 14t driver; 17mm steel flange axle nuts; all hardware in cp finish including cone nuts, axle nuts
- Component Rims
- Fusion by Odyssey model litehouse 20x1.75"; 48h; (w200) (double wall welded joint)
- Component Size
- 21-inch
- Component Stem
- Haro Lineage fusion top load stem; T6 alloy; cold forged with cnc; 52mm
- Product Family
- Lineage Sport Bashguard
- Component Chain
- KMC K1Sl; 1/2 x 1/8; Narrow Silver Super Lite
- Component Color
- Neon Green
- Component Frame
- Lineage Sport Bashguard frame - 21" full crmo; internal h/t crmo - with removable rotor tab mounting holes; welded brake mounts.
- Component Brakes
- Dia-Compe fs996 "hombre" u-brake; cold forged aluminum arms; dual spring tension adjustment w/anchor bolt parts
- Component Pedals
- Haro Fusion; alloy pedal body; crmo axle
- Component Rotors
- Teflon bearing gyro - full cnc 6061 t6 included a-plate
- Component Saddle
- Haro Fusion slim stealth pivotal seat
- Component Headset
- Sealed Integrated, 1 1/8"
- Component Crankset
- Haro Lineage heat treated 3-piece alloy 175mm cranks (bolt drive interface) rsd and lsd; 22mm spindle
- Component Seatpost
- Haro Fusion stealth pivotal seat post; 25.4 x 300mm
- Component Handlebar
- Lineage kneesaver bar 8.5"; 100% heat treated; multi-butted
- Component Rear Tire
- Haro HPF tire; 20x2.20; 100 max psi
- Component Front Tire
- Haro HPF tire; 20x2.20; 100 max psi
- Component Tape Grips
- Haro team grip; 145mm length x 29mm diameter; 50mm od flange (low); kraton a15 material (super soft).
- Component Brake Levers
- Dia-Compe "tech-77" lever without stopper; right and left side; diecast aluminum bracket with hinged clamp; cold forged aluminum lever
- Component Bottom Bracket
- Sealed MID 22mm BB
- Component Accessories Extras
- 6061 alloy pegs; 34mm od; 110mm length; include 4 total pegs
- Hubs
- Front: 48h alloy hub body; 3/8"x100wx155l; crmo 155mm straight axle; 2 sealed bearings Rear: Cassette hub (male bolt); sealed bearings; 14t driver; 17mm steel flange axle nuts; all hardware in cp finish including cone nuts, axle nuts
- Rims
- Fusion by Odyssey model litehouse 20x1.75"; 48h; (w200) (double wall welded joint)
- Crankset
- Haro Lineage heat treated 3-piece alloy 175mm cranks (bolt drive interface) rsd and lsd; 22mm spindle
- Pedals
- Haro Fusion; alloy pedal body; crmo axle
- Bottom Bracket
- Sealed MID 22mm BB
- Chain
- KMC K1Sl; 1/2 x 1/8; Narrow Silver Super Lite
- Seatpost
- Haro Fusion stealth pivotal seat post; 25.4 x 300mm
- Saddle
- Haro Fusion slim stealth pivotal seat
- Handlebar
- Lineage kneesaver bar 8.5"; 100% heat treated; multi-butted
- Headset
- Sealed Integrated, 1 1/8"
- Rear Tire
- Haro HPF tire; 20x2.20; 100 max psi
- Stem
- Haro Lineage fusion top load stem; T6 alloy; cold forged with cnc; 52mm
- Accessories & Extras
- 6061 alloy pegs; 34mm od; 110mm length; include 4 total pegs
- Brake Levers
- Dia-Compe "tech-77" lever without stopper; right and left side; diecast aluminum bracket with hinged clamp; cold forged aluminum lever
- Brakes
- Dia-Compe fs996 "hombre" u-brake; cold forged aluminum arms; dual spring tension adjustment w/anchor bolt parts
- Fork
- Haro Lineage fork with 990 mounts and internal cable routing; 33mm offset; 3/8" axle; fluted one piece cnc cr-mo steerer; tapered fluted legs with Investment cast dropouts
- Frame
- Lineage Sport Bashguard frame - 21" full crmo; internal h/t crmo - with removable rotor tab mounting holes; welded brake mounts.
- Tape/Grips
- Haro team grip; 145mm length x 29mm diameter; 50mm od flange (low); kraton a15 material (super soft).
- Color
- Neon Green
- Size
- 21-inch
- Rotors
- Teflon bearing gyro - full cnc 6061 t6 included a-plate
- Front Tire
- Haro HPF tire; 20x2.20; 100 max psi
What to check when buying used
Inspection
Drivetrain wear
Check chain stretch, cassette teeth, chainrings, and shifting under load before negotiating price.
Inspection
Service history
Ask for service records covering bearings, brakes, drivetrain, and any frame or fork warranty work.