Inspection
Frame condition
Inspect the frame, fork, welds, and high-stress areas for cracks, dents, or prior repairs.
SE Racing
2017 SE Racing STR-29 Quadangle
Previous used estimate
$161 - $165
Actual value depends on condition, size, and local demand.
Value Guide market data · 2017 SE Racing STR-29 Quadangle
12-month projected trend
14%
Direction and magnitude, not judgment
vs. category average
5%
Drops faster than category avg
Price over time - 2017 SE Racing STR-29 Quadangle
Values based on actual sales data. Enter your bike's specifics to get a precise valuation.
All STR-29 model years
Compare STR-29 Quadangle models
1 modelsChoose a different build or frame style to see its value.
Overview
About this bike
Before the Quadangle, there was the STR-1. This dates back to the late 1970's when Stu Thomsen was SE Racing's National #1 pro and the sport's first superstar. His signature frame at the time was the Stu Thomsen Replica-1. This STR-1 frame had a unique design with both of the double down tubes wrapping underneath the bottom bracket shell and continuing around the Looptail rear end all the way back to the seat tube. Less than ten STR-1's were ever produced, and over the years these frames became almost mythical and the most sought after frames of all time in the vintage BMX world. Fast forward nearly 40 years to today and SE brings you the limited edition STR-29. All of the unique features and radness of the original STR-1, but built for the bigger rider with 29-inch wheels. This bike comes with an authentic SE Racing x Stu Thomsen trading card personally signed by Stu.
Specifications
- Subtype
- BMX
- Category
- BMX
- Component Fork
- Cowboy Cut Landing Gear, Full Cr-Mo
- Component Size
- 29-inch
- Component Stem
- Retro Alloy Top-Load w/ Engraved SE Logo & Lightweight Cutouts, 55mm Reach
- Product Family
- STR-29
- Component Chain
- KMC Z410A
- Component Color
- SE Blue
- Component Frame
- Stu Thomsen Replica, 100% Cr-Mo Tubing, STR-1 Inspired Double Downtube Wrap Beneath Bottom Bracket, Looptail Rear End, Retro Dropouts, Limited Edition & Individually Numbered on the Inside of the Rear Dropout
- Component Brakes
- Tektro 837-AL V-Brake, Slick Cable
- Component Pedals
- X-Pedo Low-profile Platform w/ Removable Pins
- Component Saddle
- SE Flyer Seat
- Component Headset
- Tange 1-1/8" Threadless
- Component Crankset
- Redline Flight Cranks, Dual Pinch Bolt, 175mm, Sealed Bearing American Bottom Bracket, 33T Alloy SE Racing Sprocket
- Component Handlebar
- Cr-Mo Super Big Honkin' Cruiser Bar, 31" x 7"
- Component Seat Post
- Retro Fluted Micro-Adjust Alloy, 27.2mm
- Component Front Tire
- Vee Tire Co x SE Racing Speedster, 29" x 2.10" Front & Rear
- Component Tape Grips
- Special Edition ODI Mushroom II "Stu Thomsen" Signature Dual-Ply Grips w/ SE Donuts, Made in USA
- Component Brake Levers
- Tektro 316A, 2-Finger Alloy
- Component Accessories Extras
- Chrome STR Quad Padset, Alloy Valve Caps, Alloy Rear Wheel Washers, Cutom Stu Thomsen STR-29 Sticker Sheet, Authentic Trading Card Personally Signed by Stu Thomsen
- Crankset
- Redline Flight Cranks, Dual Pinch Bolt, 175mm, Sealed Bearing American Bottom Bracket, 33T Alloy SE Racing Sprocket
- Pedals
- X-Pedo Low-profile Platform w/ Removable Pins
- Chain
- KMC Z410A
- Saddle
- SE Flyer Seat
- Handlebar
- Cr-Mo Super Big Honkin' Cruiser Bar, 31" x 7"
- Headset
- Tange 1-1/8" Threadless
- Stem
- Retro Alloy Top-Load w/ Engraved SE Logo & Lightweight Cutouts, 55mm Reach
- Accessories & Extras
- Chrome STR Quad Padset, Alloy Valve Caps, Alloy Rear Wheel Washers, Cutom Stu Thomsen STR-29 Sticker Sheet, Authentic Trading Card Personally Signed by Stu Thomsen
- Brake Levers
- Tektro 316A, 2-Finger Alloy
- Brakes
- Tektro 837-AL V-Brake, Slick Cable
- Fork
- Cowboy Cut Landing Gear, Full Cr-Mo
- Frame
- Stu Thomsen Replica, 100% Cr-Mo Tubing, STR-1 Inspired Double Downtube Wrap Beneath Bottom Bracket, Looptail Rear End, Retro Dropouts, Limited Edition & Individually Numbered on the Inside of the Rear Dropout
- Seat Post
- Retro Fluted Micro-Adjust Alloy, 27.2mm
- Tape/Grips
- Special Edition ODI Mushroom II "Stu Thomsen" Signature Dual-Ply Grips w/ SE Donuts, Made in USA
- Color
- SE Blue
- Size
- 29-inch
- Front Tire
- Vee Tire Co x SE Racing Speedster, 29" x 2.10" Front & Rear
What to check when buying used
Inspection
Drivetrain wear
Check chain stretch, cassette teeth, chainrings, and shifting under load before negotiating price.
Inspection
Service history
Ask for service records covering bearings, brakes, drivetrain, and any frame or fork warranty work.