Inspection
Frame condition
Inspect the frame, fork, welds, and high-stress areas for cracks, dents, or prior repairs.
Haro
2020 Haro Shift I/O 9
Value Guide market data · 2020 Haro Shift I/O 9
12-month trend
10%
Direction and magnitude, not judgment
vs. category average
1%
Drops faster than category avg
Price over time - 2020 Haro Shift I/O 9
Values based on actual sales data. Enter your bike's specifics to get a precise valuation.
All Shift model years
2020 Shift I/O 9 lineup
Overview
About this bike
2020 Haro Shift I/O 9 value depends on condition, original build, frame material, service history, and current buyer demand.
Specifications
Frameset
- Fork
- Fox Rhythm 36 FLOAT "E", 29in, 160mm travel, Grip Cartridge, Sweep-Adjuster, 15mm Boost axle, w/ Hydraulic Lockout
- Frame
- New Shift Plus I/O X6 Aluminum frame for Shimano STePS E8000, 4-Bar linkage w/ Carbon Injected Rocker, vertical shock, 160mm travel, Internal Battery, Enduro Bearings
- Rear Shock
- Fox Float X2, Air shock, Trunnion, 225x75mm, Hi-Speed & Low-Speed Rebound / Compression adjustments
Drivetrain
- Groupset
- Shimano XT
- Cassette
- Shimano Deore XT M8000, 11-spd, 11-46T
- Chain
- KMC e11T, 11-spd, Turbo High Durability
- Chainrings
- 38T Chainring
- Crankset
- Shimano E8000, forged, 165mm all Sizes
- Front Derailleur
- Shimano E-8000 Guide
- Rear Derailleur
- Shimano XT Di2, 11-spd, Shadow Plus
- Shifters
- Shimano XT Di2 11-spd Switch
Brakes
- Brake Levers
- Shimano BL-MT501 Hydraulic
- Brakes
- Shimano BR-MT520 Hydraulic Disc, 4-Piston, 203mm Rotors, w/ Intergrated Speed-Sensor Magnet
Cockpit
- Handlebar
- New Pivit Alloy riser bar, 35mm O.D., 780mm wide, 20mm rise
- Headset
- FSA Orbit 1.5E ZS No.57E, Internal alloy cups 1-1/8"-1.5", w/ Bottom AC Bearing, 6mm Cone
- Saddle
- WTB Volt Comp 150mm Wide
- Seatpost
- X-Fusion Manic 100, 125mm Dropper post w/ horizontal remote, Alloy, 31.6mm
- Stem
- New Pivit 3D Forged alloy 35mm, Ext. 35mm
- Grips
- WTB Waffel Single Clamp
Wheels & Tires
- Axles
- Front: 110 x 15mm, Rear: 148 x 12mm
- Front Tire
- Kenda NEVEGAL 2 29x2.6" Front, 27.5x2.6" Rear, EMC, 60tpi, Aramid beads, Tubeless Compatible
- Hubs
- Pivit Alloy disc Boost, E-Bike specific, 32h cassette, Sealed Bearings, w/ Front & Rear Thru-Axle
- Rims
- WTB ST i35 TCS 2.0, Tubeless Ready, 29" Front & 27.5" Rear, 40mm wide, Double Wall
E-System
- Battery
- New Darfon internal, STePS Compatible 630Wh (504Wh for Small size)
- Charger
- Darfon
- Motor
- Shimano STePS E8000, 250w, 70Nm Torque
Accessories
- Accessories & Extras
- Motor covers, Tubeless Valves, Darfon Battery charger, Battery Lock
Frame sizing
XS4'10"-5'2"
S5'2"-5'6"
M5'6"-5'10"
L5'10"-6'2"
XL6'2"-6'6"
M highlighted as most common resale size. Sourced from catalog metadata.
Geometry
- Stack
- Varies by size
- Reach
- Varies by size
- Wheelbase
- Varies by size
Industry standard. Sourced from catalog metadata.
What to check when buying used
Inspection
Drivetrain wear
Check chain stretch, cassette teeth, chainrings, and shifting under load before negotiating price.
Inspection
Wheel condition
Inspect rims, hubs, spokes, and bearing play; ask about the tire age and any prior wheel rebuilds.
Inspection
Service history
Ask for service records covering bearings, brakes, drivetrain, and any frame or fork warranty work.
Inspection
Battery health
Request battery cycle count and any diagnostic report; older packs lose range and capacity.
Inspection
Motor warranty
Verify motor warranty status and any firmware updates from the manufacturer dealer.