Inspection
Frame condition
Inspect the frame, fork, welds, and high-stress areas for cracks, dents, or prior repairs.
Marin
2022 Marin Alpine Trail E2
Previous used estimate
$2,671 - $2,748
Actual value depends on condition, size, and local demand.
Value Guide market data · 2022 Marin Alpine Trail E2
12-month projected trend
15%
Direction and magnitude, not judgment
vs. category average
6%
Drops faster than category avg
Price over time - 2022 Marin Alpine Trail E2
Values based on actual sales data. Enter your bike's specifics to get a precise valuation.
All Alpine model years
2024$3,792 - $3,901▲ 42% vs. 2022
2023$3,083 - $3,172▲ 15% vs. 20222022$2,671 - $2,748Currently viewing
2020$1,251 - $1,287▼ 53% vs. 2022
2019$1,103 - $1,134▼ 59% vs. 2022
2013$234 - $241▼ 91% vs. 2022
2012$209 - $215▼ 92% vs. 2022
2011$198 - $203▼ 93% vs. 2022
2010$178 - $183▼ 93% vs. 2022
2007$110 - $113▼ 96% vs. 2022
1998$130 - $134▼ 95% vs. 2022Compare Alpine Trail E2 models
1 modelsChoose a different build or frame style to see its value.
Overview
About this bike
The Alpine Trail E will take you further, faster, allowing you to tackle the most aggressive trails either up or down. Series 4 Aluminum Frame Alpine Trail E models are built upon our Series 4 aluminum frames, with detailed forgings, highly manipulated tubes, and full internal cable routing, giving the rider the highest-end alloy frame that Marin offers, compatible with modern coil or air shocks. MultiTrac Suspension The Alpine Trail E features the same great, proven MultiTrac suspension technology, but optimized for the Shimano STEPS system. With this combination, there is no need for platform or lockout levers, just get on and blast up the hills. Mixed Wheel Sizes 29" front and 27.5"+ rear wheel sizes are the ideal combination for the Alpine Trail E—the larger front wheel easily rolls over most any trail obstacle and offers the best cornering traction, while the burly 27.5 x 2.8" rear setup adds playfulness and enhances acceleration and braking traction. Dropper Post Optimized The modern-day trail rider needs their saddle out of the way at times, while low-slung frames require longer length posts. On the Alpine Trail E, seat tube lengths have been minimized, so riders of all sizes can get the proper extension needed. - Shimano STEPS EP8 system and 630Wh battery - Fox 38/Float DHX2 Performance Elite suspension - Shimano XT/SLX 11-speed drivetrain w/10-51t cassette - Shimano SLX 4-piston disc brakes - Deity Ridgeline bar/Copperhead stem
Specifications
- Subtype
- Electric Mountain
- Category
- E-Bike
- Component Fork
- Fox 38 Performance Elite, 160mm travel, 29" , 110x15mm Boost Kabolt Thru-Axle, 44mm Offset, Integrated Fox Fender
- Component Hubs
- Front: Forged Alloy, 110x15mm, Centerlock Disc, 32H Rear: Shimano HB-MT510B, 148x12mm, Centerlock Disc, Microspline Freehub Body
- Component Rims
- Front: Marin Aluminum Double Wall, 29" Diameter, 32mm Inner Rim Width Rear: Marin Aluminum Double Wall, 27.5" Diameter, 38mm Inner Rim Width; Pinned Joint, Disc Specific, Tubeless Compatible
- Component Size
- Small, Medium, Large, X-Large
- Component Stem
- Deity Copperhead 35mm, Black Ano
- Product Family
- Alpine
- Component Chain
- KMC E12S, E-Bike Specific Chain
- Component Color
- Grey/Black
- Component Frame
- All New Series 4 Alloy Frame, 150mm Multitrac suspension, Integrated Battery/On-switch/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor
- Component Motor
- Shimano STEPS EP8 Drive Unit, 250W, 85Nm
- Component Brakes
- Shimano SLX 4-Piston Hydraulic Disc, 203mm Rotor
- Component Pedals
- Marin MTB Plastic
- Component Saddle
- Marin E-MTB Saddle
- Component Battery
- BT-8036, Internal 630Wh
- Component Charger
- Shimano Battery Charger EC-E6002
- Component Headset
- FSA No 57, Semi-Sealed Cartridge Bearings, 1 1/8" x 1 1/2"
- Component Crankset
- e13 e*Spec Plus Crank, 165mm Length with e13 Plus Chainguide, Aluminum Plate
- Component Seatpost
- X-Fusion Manic, Size S 125mm Travel, Size M and L 150mm Travel, Size XL 170mm Travel, 30.9mm
- Component Shifters
- Shimano SLX 7100 12-Speed, I-Spec EV
- Component Handlebar
- Deity Ridgeline, Stealth Finish, 35mm Clamp, 800mm Width
- Component Chainrings
- e13 e*Spec DM Chainring 38T
- Component Front Tire
- Front: Maxxis Assegai 29x2.5", 3C MaxxTerra, EXO+, Tubeless Compatible Rear: Maxxis Minion DHR II 27.5x2.8”, 3C Maxx Terra, EXO+, Tubeless Compatible
- Component Rear Shock
- Fox Float DHX2, Performance Elite, Low Speed Compression and Rebound Adjustment, 205x65mm, Trunnion Upper Mount, 25mmxM8 Lower Mount, S/M Spring = 350lb, L/XL Spring = 450lb
- Component Tape Grips
- Marin Single Clamp Locking
- Component Brake Levers
- Shimano SLX Levers, I-Spec EV
- Component Rear Derailleur
- Shimano XT 8100 12-Speed, SGS
- Component Cassette Freewheel
- Shimano SLX M7100, 12-Speed, 10-51T
- Component Controller Display
- SC-E8000 Display, Shimano Left Hand Switch for Assist Mode Change
- Rear Shock
- Fox Float DHX2, Performance Elite, Low Speed Compression and Rebound Adjustment, 205x65mm, Trunnion Upper Mount, 25mmxM8 Lower Mount, S/M Spring = 350lb, L/XL Spring = 450lb
- Hubs
- Front: Forged Alloy, 110x15mm, Centerlock Disc, 32H Rear: Shimano HB-MT510B, 148x12mm, Centerlock Disc, Microspline Freehub Body
- Rims
- Front: Marin Aluminum Double Wall, 29" Diameter, 32mm Inner Rim Width Rear: Marin Aluminum Double Wall, 27.5" Diameter, 38mm Inner Rim Width; Pinned Joint, Disc Specific, Tubeless Compatible
- Crankset
- e13 e*Spec Plus Crank, 165mm Length with e13 Plus Chainguide, Aluminum Plate
- Pedals
- Marin MTB Plastic
- Chain
- KMC E12S, E-Bike Specific Chain
- Seatpost
- X-Fusion Manic, Size S 125mm Travel, Size M and L 150mm Travel, Size XL 170mm Travel, 30.9mm
- Saddle
- Marin E-MTB Saddle
- Handlebar
- Deity Ridgeline, Stealth Finish, 35mm Clamp, 800mm Width
- Headset
- FSA No 57, Semi-Sealed Cartridge Bearings, 1 1/8" x 1 1/2"
- Rear Derailleur
- Shimano XT 8100 12-Speed, SGS
- Stem
- Deity Copperhead 35mm, Black Ano
- Brake Levers
- Shimano SLX Levers, I-Spec EV
- Brakes
- Shimano SLX 4-Piston Hydraulic Disc, 203mm Rotor
- Chainrings
- e13 e*Spec DM Chainring 38T
- Fork
- Fox 38 Performance Elite, 160mm travel, 29" , 110x15mm Boost Kabolt Thru-Axle, 44mm Offset, Integrated Fox Fender
- Frame
- All New Series 4 Alloy Frame, 150mm Multitrac suspension, Integrated Battery/On-switch/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor
- Shifters
- Shimano SLX 7100 12-Speed, I-Spec EV
- Tape/Grips
- Marin Single Clamp Locking
- Motor
- Shimano STEPS EP8 Drive Unit, 250W, 85Nm
- Charger
- Shimano Battery Charger EC-E6002
- Battery
- BT-8036, Internal 630Wh
- Color
- Grey/Black
- Size
- X-Large
- Cassette/Freewheel
- Shimano SLX M7100, 12-Speed, 10-51T
- Controller/Display
- SC-E8000 Display, Shimano Left Hand Switch for Assist Mode Change
- Front Tire
- Front: Maxxis Assegai 29x2.5", 3C MaxxTerra, EXO+, Tubeless Compatible Rear: Maxxis Minion DHR II 27.5x2.8”, 3C Maxx Terra, EXO+, Tubeless Compatible
What to check when buying used
Inspection
Drivetrain wear
Check chain stretch, cassette teeth, chainrings, and shifting under load before negotiating price.
Inspection
Service history
Ask for service records covering bearings, brakes, drivetrain, and any frame or fork warranty work.
Inspection
Battery health
Request battery cycle count, capacity diagnostics, and motor service records.