Inspection
Frame condition
Inspect the frame, fork, welds, and high-stress areas for cracks, dents, or prior repairs.
Cannondale
2019 Cannondale Habit Carbon 1
Value Guide market data · 2019 Cannondale Habit Carbon 1
12-month trend
12%
Direction and magnitude, not judgment
vs. category average
— %
No category comparison available
Price over time - 2019 Cannondale Habit Carbon 1
Values based on actual sales data. Enter your bike's specifics to get a precise valuation.
All Habit model years
2025$1,580 - $1,835▼ 78% vs. 2019
2024$3,543 - $4,115▼ 52% vs. 2019
2023$8,138 - $9,450▲ 11% vs. 2019
2021$4,464 - $5,184▼ 39% vs. 2019
2020$7,673 - $8,910▲ 4% vs. 20192019$7,347 - $8,532Currently viewing
2018$4,185 - $4,860▼ 43% vs. 2019
2017$7,440 - $8,640▲ 1% vs. 2019
2016$10,695 - $12,420▲ 46% vs. 20192019 Habit Carbon 1 lineup
Overview
About this bike
2019 Cannondale Habit Carbon 1 value depends on condition, original build, frame material, service history, and current buyer demand.
Specifications
Frameset
- Frame
- Carbon / All-New Habit, 130mm travel, BallisTec Carbon Frame and Swingarm, Proportional Response Tuned, Ai offset drivetrain, ISCG05, PF30, Post mount brake, tapered headtubeBB Standard:PF30, Press Fit
- Suspension
- Full, 130 / 140mm
- Fork
- Fox Factory Float 34 / Fox Float Factory 34, 140mm, FIT4 Damper, 3-Pos adj. Kashima coating, 15x110, tapered steerer, 51mm offsetTravel:140mmSpring Type:Air
- Shock
- Fox Float DPX2 Factory / Fox Float Factory DPX2 EVOL, 130mm, 3-Pos adj.Travel:130mm
- Headset
- Integrated, 1-1/8 to 1.5", sealed angular contact bearings
Drivetrain
- Drivetrain
- 1 × 12
- Groupset
- XTR
- Bottom Bracket
- Cannondale Alloy PressFit30
- Rear Derailleur
- Shimano XTR, Shadow Plus, 12-speed
- Crank
- Cannondale HollowGram Si, BB30 w/ X-Sync SpideRing, 30T Ai Offset
- Shifters
- Shimano XTR, 12-speed
- Cassette
- Shimano XTR, 10-51, 12-speed
- Chain
- Shimano XTR, 12-speed
Brakes
- Brakes
- Shimano Dura-Ace Hydraulic Disc / Shimano XTR Trail, 4 piston, 180/180mm RT900 rotorsType:Shimano Dura-Ace Hydraulic Disc
- Brake Levers
- Shimano XTR Trail with Reach Adjust
Cockpit
- Seatpost
- Dropper / {S=Fox Factory Transfer dropper, Kashima coating, internal routing, 31.6, 125mm, M=Fox Factory Transfer dropper, Kashima coating, internal routing, 31.6, 125mm, L=150mm, XL=150mm}
- Stem
- Cannondale C1, 3D Forged 6061 Alloy, 1-1/8", 31.8, 0°
- Handlebar
- Cannondale C1 Riser, Carbon, 15mm rise, 9° sweep, 4° rise, 780mm
- Saddle
- Fabric Scoop Shallow Race, ti rails
- Grips
- Cannondale Locking Grips
Wheels & Tires
- Wheels
- 29″ Aluminum
- Rims
- Stan’s NoTubes Arch MK3, 28h, tubeless ready
- Spokes
- DT Swiss Competition, straight pull (Ai Offset dish - rear)
- Front Hub
- Shimano XTR 15x110 front, 12x148 rear 28h, straight pull
- Rear Hub
- Shimano XTR 15x110 front, 12x148 rear 28h, straight pull
- Tires
- Maxxis Minion DHF 29 x 2.5" WT front, High Roller II 2.3" rear, 3C compound, Max Terra, EXO puncture protection, tubeless ready
Pedals
- Pedals
- Not Included
Frame sizing
XSManufacturer sizing
SMManufacturer sizing
MDManufacturer sizing
LGManufacturer sizing
XLManufacturer sizing
MD highlighted as most common resale size. Sourced from catalog metadata.
Geometry
- Stack
- 616
- Reach
- 430
- Top Tube Length
- 606
- Seat Tube Length
- 440
- Chainstay Length
- 435
- Wheelbase
- 1,176
Industry standard. Sourced from catalog metadata.
What to check when buying used
Inspection
Drivetrain wear
Check chain stretch, cassette teeth, chainrings, and shifting under load before negotiating price.
Inspection
Wheel condition
Inspect rims, hubs, spokes, and bearing play; ask about the tire age and any prior wheel rebuilds.
Inspection
Service history
Ask for service records covering bearings, brakes, drivetrain, and any frame or fork warranty work.
Inspection
Suspension service
Confirm fork lowers and rear shock service intervals; ask for the most recent service receipts.
Inspection
Frame pivots & bearings
Cycle the suspension off the bike to feel for play, grit, or noise in pivot bearings.