Inspection
Frame condition
Inspect the frame, fork, welds, and high-stress areas for cracks, dents, or prior repairs.
Haro
2021 Haro Thread Two
Previous used estimate
$710 - $730
Actual value depends on condition, size, and local demand.
Value Guide market data · 2021 Haro Thread Two
12-month projected trend
12%
Direction and magnitude, not judgment
vs. category average
4%
Drops faster than category avg
Price over time - 2021 Haro Thread Two
Values based on actual sales data. Enter your bike's specifics to get a precise valuation.
All Thread model years
Overview
About this bike
As the second hardtail model in the line, the Thread Two offers the same radical-looking aluminum frame with upgraded components for serious shredders, from its Manitou Circus Expert fork to the gravity-proven FSA Gradient cockpit, sealed bearing Haro SD Nylon pedals, Pivotal MTB saddle and alloy seat-post, Spank Spoon rims, and the New Haro oversize sealed rotor for fast bar-spin action. The Thread Two offers a unique combination with its custom alloy detangler and hydraulic-assisted rear brake with the innovative TRP HY/RD disc caliper for high-performance braking while bar-spinning away...Get ready to nail that line like you never have before... Features - Haro Thread X6 series frame w/ tapered head tube - 23.3" TT length w/ 410mm/16.2" reach - Custom Haro OS rotor - Manitou Circus Expert 100mm fork w/ 20mm thru-axle - Haro Aluminum 2-pc crankset, 30T Narrow-Wide chainring - FSA Gradient, 25mm rise bar & 1-1/8" stem - Haro Pivotal saddle and post - Spank Ind. Spoon aluminum DW 32h rims - Pivit aluminum disc cassette hubs w/14t Crmo cog - Kenda Small Block Eight 2.35"/2.10" tires - TRP HY/RD-C mechanical/hydraulic rear disc brake
Specifications
- Subtype
- Cross Country
- Category
- Mountain
- Component Fork
- Manitou Circus Expert | 100mm travel | Tapered steer tube | 110x20mm thru-axle
- Component Hubs
- Pivit sealed bearing Aluminum disc | singlespeed cassette | 20mm front thru axle | 32h
- Component Size
- One Size
- Component Stem
- FSA Gradient 1-1/8" | 45mm Ext.
- Product Family
- Thread
- Component Chain
- KMC Z1 | 1/2" x 3/32"
- Component Color
- Matte Black/Alloy
- Component Frame
- Haro Full X6 Aluminum Thread frame | Internal head tube | 68mm Threaded BSA | ISCG Mount
- Component Tires
- Kenda Small Block 8 26x2.35" Front | 26"x2.10" Rear | 60 TPI
- Component Brakes
- TRP HY/RD-C 160 | Cable / Hydraulic Disc Brake for IS Rear Mount | 160mm disc
- Component Pedals
- Haro SD Nylon | Sealed bearings
- Component Saddle
- Haro Pivotal w/ hollow bolt
- Component Headset
- FSA # 51 | 1-1/8"-1.5" Aluminum | top | lower AC Bearings
- Component Crankset
- Haro Aluminum 2-pc | cold forged | 30T Narrow-Wide chainring
- Component Seat Post
- Pivit aluminum 31.6mm | Pivotal
- Component Handlebars
- FSA Gradient Riser | 25mm Rise | 9 Deg. Backsweep | 6 deg. Upsweep | 31.8mm Clamp
- Component Tape Grips
- Velo Lock On
- Component Brake Levers
- Odyssey Trigger for Single Gyro upper cable
- Component Bottom Bracket
- 24mm | 4 x Sealed bearing
- Component Accessories Extras
- Haro OS Teflon Bearing Rotor | Upper & Lower rotor cables
- Component Cassette Rear Cogs
- 14T Chromoly cog
- Hubs
- Pivit sealed bearing Aluminum disc | singlespeed cassette | 20mm front thru axle | 32h
- Tires
- Kenda Small Block 8 26x2.35" Front | 26"x2.10" Rear | 60 TPI
- Crankset
- Haro Aluminum 2-pc | cold forged | 30T Narrow-Wide chainring
- Pedals
- Haro SD Nylon | Sealed bearings
- Bottom Bracket
- 24mm | 4 x Sealed bearing
- Chain
- KMC Z1 | 1/2" x 3/32"
- Saddle
- Haro Pivotal w/ hollow bolt
- Headset
- FSA # 51 | 1-1/8"-1.5" Aluminum | top | lower AC Bearings
- Stem
- FSA Gradient 1-1/8" | 45mm Ext.
- Accessories & Extras
- Haro OS Teflon Bearing Rotor | Upper & Lower rotor cables
- Brake Levers
- Odyssey Trigger for Single Gyro upper cable
- Brakes
- TRP HY/RD-C 160 | Cable / Hydraulic Disc Brake for IS Rear Mount | 160mm disc
- Fork
- Manitou Circus Expert | 100mm travel | Tapered steer tube | 110x20mm thru-axle
- Frame
- Haro Full X6 Aluminum Thread frame | Internal head tube | 68mm Threaded BSA | ISCG Mount
- Handlebars
- FSA Gradient Riser | 25mm Rise | 9 Deg. Backsweep | 6 deg. Upsweep | 31.8mm Clamp
- Seat Post
- Pivit aluminum 31.6mm | Pivotal
- Tape/Grips
- Velo Lock On
- Color
- Matte Black/Alloy
- Size
- One Size
- Cassette/Rear Cogs
- 14T Chromoly cog
What to check when buying used
Inspection
Drivetrain wear
Check chain stretch, cassette teeth, chainrings, and shifting under load before negotiating price.
Inspection
Service history
Ask for service records covering bearings, brakes, drivetrain, and any frame or fork warranty work.
Inspection
Suspension service
Confirm fork and rear shock service intervals and check pivot bearings for play.