Inspection
Frame condition
Inspect the frame, fork, welds, and high-stress areas for cracks, dents, or prior repairs.
Jamis
2020 Jamis Hardline C1
Previous used estimate
$2,754 - $2,834
Actual value depends on condition, size, and local demand.
Value Guide market data · 2020 Jamis Hardline C1
12-month projected trend
14%
Direction and magnitude, not judgment
vs. category average
7%
Drops faster than category avg
Price over time - 2020 Jamis Hardline C1
Values based on actual sales data. Enter your bike's specifics to get a precise valuation.
All Hardline model years
Compare Hardline C1 models
1 modelsChoose a different build or frame style to see its value.
Overview
About this bike
If pedaling to explore the entire mountain and shredding every downhill is your thing, the Jamis Hardline C1 delivers. Its 170mm Fox 36 FLOAT fork keeps your tire glued to your line of choice with another 160mm of rear travel lying in wait, with a Fox DHX2 Factory Series coil shock and 3VO, one of the most advanced suspension designs available. Its Stans Flow CB7 Carbon wheels and Vittoria Martello tires rail on sculpted park runs and rip through rooty enduro tracks without batting an eye. A Truvativ crank drives power into SRAM's 1x12-speed XX1 drivetrain that shifts fast enough to keep up with your rowdiest descents, while providing a wide range that lets you self-shuttle and proudly earn your fun... and some bragging rights. Push that fun envelope on the way down, because the 4-piston TRP G-Spec DH brakes harness fade-free power from another realm to keep you just this side of too-fast, all while a Fox Transfer dropper post supports you in a dialed position so you get the most out of every inch of trail.
Specifications
- Subtype
- Trail / Enduro
- Category
- Mountain
- Component Fork
- Fox Factory 36 Float 27.5" w/ 3-position adjust compression & lock-out,15x110mm axle, air spring compression, rebound adjust, tapered alloy steerer, 170mm travel
- Component Size
- 15.5-inch, 17-inch, 19-inch, 21-inch
- Component Stem
- Race Face Turbine R, 50mm extension, 35mm clamp diameter
- Product Family
- Hardline
- Component Axles
- Front: 110 x 15mm Rear: 148 x 12mm
- Component Chain
- SRAM XX1 Eagle, 12-speed
- Component Color
- Signal
- Component Frame
- Dyad Pro High Modulus Carbon Fiber, 160mm travel 3VO suspension, Enduro Max sealed bearing pivots, 1.5 - 1 1/8" tapered head tube, 12x148mm thru-axle, Internal dropper post routing, Custom Jamis upper chainguide, MRP SXg lower chainguide, SLS 400lb Spring, high/low speed compression, high/low speed rebound,10mm hardware, replaceable derailleur hanger
- Component Brakes
- TRP G-Spec DH 4-piston hydraulic disc, TR-33 180mm front & rear 6-bolt rotors
- Component Saddle
- WTB Volt
- Component Headset
- FSA Orbit IS Integrated, 8mm cone spacer
- Component Cassette
- SRAM XG1299, 12-speed, 10-50T
- Component Crankset
- Truvativ Descendant Carbon
- Component Shifters
- SRAM XX1 Eagle, 1x12-speed
- Component Handlebar
- Race Face Turbine R, 780mm x 20mm rise, 35mm diameter
- Component Seat Post
- Fox Transfer Dropper, 1x remote
- Component Chainrings
- 32T
- Component Front Tire
- Vittoria Martello 27.5 x 2.35, TNT tubeless
- Component Rear Shock
- Fox DHX2 Factory Series coil shock w/2-position compression switch
- Component Tape Grips
- Jamis Lock-On
- Component Brake Levers
- TRP G-Spec
- Component Bottom Bracket
- SRAM DUB
- Component Rear Derailleur
- SRAM XX1 Eagle, 12-speed
- Rear Shock
- Fox DHX2 Factory Series coil shock w/2-position compression switch
- Crankset
- Truvativ Descendant Carbon
- Bottom Bracket
- SRAM DUB
- Chain
- SRAM XX1 Eagle, 12-speed
- Saddle
- WTB Volt
- Handlebar
- Race Face Turbine R, 780mm x 20mm rise, 35mm diameter
- Headset
- FSA Orbit IS Integrated, 8mm cone spacer
- Rear Derailleur
- SRAM XX1 Eagle, 12-speed
- Stem
- Race Face Turbine R, 50mm extension, 35mm clamp diameter
- Axles
- Front: 110 x 15mm Rear: 148 x 12mm
- Brake Levers
- TRP G-Spec
- Brakes
- TRP G-Spec DH 4-piston hydraulic disc, TR-33 180mm front & rear 6-bolt rotors
- Cassette
- SRAM XG1299, 12-speed, 10-50T
- Chainrings
- 32T
- Fork
- Fox Factory 36 Float 27.5" w/ 3-position adjust compression & lock-out,15x110mm axle, air spring compression, rebound adjust, tapered alloy steerer, 170mm travel
- Frame
- Dyad Pro High Modulus Carbon Fiber, 160mm travel 3VO suspension, Enduro Max sealed bearing pivots, 1.5 - 1 1/8" tapered head tube, 12x148mm thru-axle, Internal dropper post routing, Custom Jamis upper chainguide, MRP SXg lower chainguide, SLS 400lb Spring, high/low speed compression, high/low speed rebound,10mm hardware, replaceable derailleur hanger
- Seat Post
- Fox Transfer Dropper, 1x remote
- Shifters
- SRAM XX1 Eagle, 1x12-speed
- Tape/Grips
- Jamis Lock-On
- Color
- Signal
- Size
- 21-inch
- Front Tire
- Vittoria Martello 27.5 x 2.35, TNT tubeless
What to check when buying used
Inspection
Drivetrain wear
Check chain stretch, cassette teeth, chainrings, and shifting under load before negotiating price.
Inspection
Service history
Ask for service records covering bearings, brakes, drivetrain, and any frame or fork warranty work.
Inspection
Suspension service
Confirm fork and rear shock service intervals and check pivot bearings for play.