Inspection
Frame condition
Inspect the frame, fork, welds, and high-stress areas for cracks, dents, or prior repairs.
Salsa
Previous used estimate
$2,454 - $2,524
Actual value depends on condition, size, and local demand.

12-month projected trend
13%
Direction and magnitude, not judgment
vs. category average
5%
Drops faster than category avg
Values based on actual sales data. Enter your bike's specifics to get a precise valuation.
Choose a different build or frame style to see its value.
Cassidy SLX is built for more than just getting downhill the fastest. Sure, the 6061-T6 aluminum frame is up for all the trail punishment you can put it through. And the RockShox Super Deluxe Select+ shock and ZEB R fork have your back with 165 mm rear and 180 mm of suspension travel on tap. Cassidy's geometry and our Split Pivot suspension design ensure your tires stick to the trail, whether you're hurtling downhill or climbing back up for another lap. Unlike other enduro bikes, Cassidy features on-bike storage, such as a tube strap spot, a top tube mount, and full-size bottle mount. This lets you extend your ride time or just get the sweaty pack off your back. With a Shimano SLX 1 x 12 drivetrain and four-piston brakes, you're equipped for any enduro course or trail day. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.
Inspection
Inspect the frame, fork, welds, and high-stress areas for cracks, dents, or prior repairs.
Inspection
Check chain stretch, cassette teeth, chainrings, and shifting under load before negotiating price.
Inspection
Ask for service records covering bearings, brakes, drivetrain, and any frame or fork warranty work.
Inspection
Confirm fork and rear shock service intervals and check pivot bearings for play.