Specialized

2022 Specialized Stumpjumper EVO Pro

Previous used estimate

$3,133 - $3,223

Actual value depends on condition, size, and local demand.

2022 Specialized Stumpjumper EVO Pro

Value Guide market data · 2022 Specialized Stumpjumper EVO Pro

12-month projected trend

13%

Direction and magnitude, not judgment

vs. category average

9%

Drops faster than category avg

Price over time - 2022 Specialized Stumpjumper EVO Pro

$8.6k$4.9k$1.2kMSRPMSRPYr 1Yr 2Yr 3Yr 4Yr 5Yr 6Yr 7Yr 7Yr 8Yr 9Yr 10Yr 11Yr 12Yr 13Yr 14Yr 14Yr 15Yr 16Yr 17Yr 18Yr 19Yr 20Yr 20

Values based on actual sales data. Enter your bike's specifics to get a precise valuation.

All Stumpjumper EVO model years

Overview

About this bike

The Stumpjumper EVO Pro is a testament to full-gas trail performance. With an all-new design, from its S-Sizing geometry with an adjustable head tube angle, to its 150mm of shred-ready travel, this thing is a full-on ripper. And to top it off, it's build has been hand-picked to keep overall weight low and stoke high. Fox Factory suspension? Check. Carbon 30mm-wide wheels? Check. XO1 Eagle drivetrain? Oh, yeah. With the Stumpjumper EVO Pro, you get all the goodies at a more palatable price. - All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we've not only improved the pedaling performance of the Stumpjumper, but we've made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs. - Rider-First Engineered frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you're a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you'll experience the same ride traits (rail-sharp cornering and balanced front and rear stiffness) at the lightest-possible weight. - The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle - these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front. - We introduced the SWAT door on the Stumpjumper in 2016, adding room IN your frame for those "oh sh**t" necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant. With the new Stumpjumper, we have increased the volume and added a SWAT Bladder, giving you an extra 22oz of water storage (the same size as a small water bottle) hidden in your downtube.

Specifications

Subtype
Trail / Enduro
Category
Mountain
Component Fork
FOX FLOAT 36 Factory, GRIP2 damper, 15x110mm, 44mm offset, S1: 150mm of travel, S2-S6: 160mm of travel
Component Hubs
Front: DT Swiss 350, sealed cartridge bearings, 15x110mm spacing, 28h Rear: DT Swiss 350, Star Ratchet, 36t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h
Component Rims
Roval Traverse Carbon 29, hookless carbon, 30mm inner width, hand-built, 2Bliss Ready
Component Size
S1, S2, S3, S4, S5, S6
Component Stem
Deity, 35.0mm
Product Family
Stumpjumper EVO
Component Axles
Front: 110 x 15mm Rear: 148 x 21mm
Component Chain
SRAM X01 Eagle, 12-speed
Component Color
Gloss Sand/Black
Component Frame
FACT 11m carbon chassis and rear-end, asymmetrical design, Mixed Wheel Trail Geometry, SWAT Door integration, head tube angle adjustment, horst pivot BB adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel
Component Brakes
SRAM Code RSC, 4-piston caliper, hydraulic disc
Component Pedals
Sold separately
Component Rotors
200mm
Component Saddle
Bridge, 155/143mm, Hollow Ti-rails
Component Spokes
DT Competition Race
Component Crankset
SRAM X1 Carbon, DUB, S1:165mm, S2-S5: 170mm, S6: 175mm
Component Seatpost
Bike Yoke, Revive Max, 34.9 (S1:120mm, S2/S3:150mm, S4-S6: 185mm)
Component Shifters
SRAM Eagle AXS Rocker Paddle
Component Handlebar
Roval Traverse SL Carbon, riser bar, 6-degree upsweep, 8-degree backsweep, 30mm rise, 800mm, 35.0mm
Component Rear Tire
Front: Butcher, GRID TRAIL casing, GRIPTON T9 compound, 2Bliss Ready, 29x2.3" Rear: Eliminator, GRID TRAIL casing, GRIPTON T7 compound, 29x2.3"
Component Chainrings
Alloy, 30T
Component Front Tire
Front: Butcher, GRID TRAIL casing, GRIPTON T9 compound, 2Bliss Ready, 29x2.3" Rear: Eliminator, GRID TRAIL casing, GRIPTON T7 compound, 29x2.3"
Component Rear Shock
FOX FLOAT X Factory, Rx Trail Tune, EVOL Air sleeve, 2-position lever w/ LSC adjustment, S1:210x50mm, S2-S6:210x55mm
Component Tape Grips
Deity, Knuckleduster, Black
Component Bottom Bracket
SRAM DUB, BSA 73mm, threaded
Component Rear Derailleur
SRAM X01 Eagle AXS
Component Accessories Extras
Increased-volume SWAT Door integration with 22oz SWAT Bladder
Component Cassette Freewheel
SRAM XG-1295 Eagle, 10-52t
Rear Shock
FOX FLOAT X Factory, Rx Trail Tune, EVOL Air sleeve, 2-position lever w/ LSC adjustment, S1:210x50mm, S2-S6:210x55mm
Hubs
Front: DT Swiss 350, sealed cartridge bearings, 15x110mm spacing, 28h Rear: DT Swiss 350, Star Ratchet, 36t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h
Rims
Roval Traverse Carbon 29, hookless carbon, 30mm inner width, hand-built, 2Bliss Ready
Crankset
SRAM X1 Carbon, DUB, S1:165mm, S2-S5: 170mm, S6: 175mm
Pedals
Sold separately
Bottom Bracket
SRAM DUB, BSA 73mm, threaded
Chain
SRAM X01 Eagle, 12-speed
Seatpost
Bike Yoke, Revive Max, 34.9 (S1:120mm, S2/S3:150mm, S4-S6: 185mm)
Saddle
Bridge, 155/143mm, Hollow Ti-rails
Handlebar
Roval Traverse SL Carbon, riser bar, 6-degree upsweep, 8-degree backsweep, 30mm rise, 800mm, 35.0mm
Rear Derailleur
SRAM X01 Eagle AXS
Rear Tire
Front: Butcher, GRID TRAIL casing, GRIPTON T9 compound, 2Bliss Ready, 29x2.3" Rear: Eliminator, GRID TRAIL casing, GRIPTON T7 compound, 29x2.3"
Stem
Deity, 35.0mm
Accessories & Extras
Increased-volume SWAT Door integration with 22oz SWAT Bladder
Axles
Front: 110 x 15mm Rear: 148 x 21mm
Brakes
SRAM Code RSC, 4-piston caliper, hydraulic disc
Chainrings
Alloy, 30T
Fork
FOX FLOAT 36 Factory, GRIP2 damper, 15x110mm, 44mm offset, S1: 150mm of travel, S2-S6: 160mm of travel
Frame
FACT 11m carbon chassis and rear-end, asymmetrical design, Mixed Wheel Trail Geometry, SWAT Door integration, head tube angle adjustment, horst pivot BB adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel
Shifters
SRAM Eagle AXS Rocker Paddle
Tape/Grips
Deity, Knuckleduster, Black
Color
Gloss Sand/Black
Size
S6
Spokes
DT Competition Race
Cassette/Freewheel
SRAM XG-1295 Eagle, 10-52t
Rotors
200mm
Front Tire
Front: Butcher, GRID TRAIL casing, GRIPTON T9 compound, 2Bliss Ready, 29x2.3" Rear: Eliminator, GRID TRAIL casing, GRIPTON T7 compound, 29x2.3"

What to check when buying used

Inspection

Frame condition

Inspect the frame, fork, welds, and high-stress areas for cracks, dents, or prior repairs.

Inspection

Drivetrain wear

Check chain stretch, cassette teeth, chainrings, and shifting under load before negotiating price.

Inspection

Service history

Ask for service records covering bearings, brakes, drivetrain, and any frame or fork warranty work.

Inspection

Suspension service

Confirm fork and rear shock service intervals and check pivot bearings for play.

Shop Our Inventory