Inspection
Frame condition
Inspect the frame, fork, welds, and high-stress areas for cracks, dents, or prior repairs.
Santa Cruz
Estimated used market value
$3,561 - $3,664
Actual value depends on condition, size, and local demand.

12-month projected trend
26%
Direction and magnitude, not judgment
vs. category average
16%
Drops faster than category avg
Values based on actual sales data. Enter your bike's specifics to get a precise valuation.
Fully dialed at every size: Proportional Geometry and frame stiffness tune. Chainstay length and seat angle are matched to the frame size (STA steepens and rear center grows as frame size increases) so that every rider, no matter what height, gets the same balance of geometry and handling characteristics. We tailor stiffness for every size to ensure everyone gets the same ride quality. Bigger riders mean greater stresses on larger frames, but that's remedied with our size-specific frame stiffness tunes. - VPP™ VPP™ stands for virtual pivot point - an engineering principal synonymous with high performance that spans from short travel platforms like the Tallboy right up to our DH World Cup-winning V10. - 120mm VPP™ Travel Some call 120mm "short travel", others call it all the travel you'll need. The Tallboy is an efficient XC pedaler with a geo and shock tune that makes it way more capable than the millimeters suggest. - Snappy Suspension The Tallboy has a lower starting ratio and an increased ending ratio of the leverage curve. This makes it really sensitive further into the travel and helps the bike ride higher in its stroke, producing a more responsive, snappy feel. - Bump Buster Significantly reducing peak anti-squat (over previous generations of the Tallboy), has improved both small bump sensitivity and square-edge compliance. And, because anti-squat values trend with ant-rise, we were also able to reduce the anti-rise to improve the braking sensitivity. - Glovebox: Always Within Reach Place your ride essentials securely in the Tallboy's downtube. The Glovebox comes with a fitted Tool Wallet and Tube Purse, tailored for the frame to keep your tools close to hand.
Inspection
Inspect the frame, fork, welds, and high-stress areas for cracks, dents, or prior repairs.
Inspection
Check chain stretch, cassette teeth, chainrings, and shifting under load before negotiating price.
Inspection
Ask for service records covering bearings, brakes, drivetrain, and any frame or fork warranty work.
Inspection
Confirm fork and rear shock service intervals and check pivot bearings for play.