Inspection
Frame condition
Inspect the frame, fork, welds, and high-stress areas for cracks, dents, or prior repairs.
Specialized
2022 Specialized S-Works Stumpjumper
Value Guide market data · 2022 Specialized S-Works Stumpjumper
12-month trend
12%
Direction and magnitude, not judgment
vs. category average
— %
No category comparison available
Price over time - 2022 Specialized S-Works Stumpjumper
Values based on actual sales data. Enter your bike's specifics to get a precise valuation.
All Stumpjumper S-Works model years
2022 S-Works Stumpjumper lineup
Overview
About this bike
2022 Specialized S-Works Stumpjumper value depends on condition, original build, frame material, service history, and current buyer demand.
Specifications
Frameset
- Rear Shock
- FOX FLOAT DPS Factory, Rx Trail Tune, EVOL Air sleeve, Kashima Coat, 3-position adjustment w/ Open Mode Adjustment, 190x45mm
- Fork
- FOX FLOAT 34 Factory, GRIP2 damper, Kashima Coating, 15x110mm, 44mm offset, 140mm of travel
- Frame
- FACT 11m carbon chassis and rear-end, asymmetrical design, 29 Trail Geometry, SWAT™ Door integration, flip chip Head Tube/Bottom Bracket adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 130mm of travel
- Fork Rake/Offset
- 44mm,44mm,44mm,44mm,44mm,44mm
- Fork Length (full)
- 550mm,550mm,550mm,550mm,550mm,550mm
Drivetrain
- Groupset
- 2022 Specialized S-Works Stumpjumper
- Shift Levers
- SRAM Eagle AXS Rocker Paddle
- Crankset
- SRAM XX1 Eagle, DUB, S1:165mm, S2-S5: 170mm, S6: 175mm
- Bottom Bracket
- SRAM DUB, BSA 73mm, Threaded
- Chain
- SRAM XX1 Eagle
- Rear Derailleur
- SRAM XX1 Eagle AXS
- Chainrings
- Alloy, 30T
- Cassette
- Sram XG-1299, 12-Speed, 10-52t
- Crank Length
- 165mm,170mm,170mm,170mm,170mm,175mm
Brakes
- Rear Brake
- SRAM G2 Ultimate, 4-piston caliper, hydraulic disc, 180mm
- Front Brake
- SRAM G2 Ultimate, 4-piston caliper, hydraulic disc, 200mm
Cockpit
- Seatpost
- RockShox Reverb AXS, 30.9, 1X remote, (S1:100mm, S2: 125mm, S3: 150mm, S4-S6: 170mm)
- Saddle
- Bridge, 155/143mm, Hollow Ti-rails
- Handlebar
- Roval Traverse SL Carbon, riser bar, 6-degree upsweep, 8-degree backsweep, 30mm rise, 780mm, 35.0mm
- Stem
- Deity, 35.0mm Bore (S1-S2: 35mm length, S3-S6: 50mm length)
- Grips
- Deity, Knuckleduster, Black
- Seat Binder
- Alloy, 38.6mm
- Min Seatpost Insertion
- 80mm,80mm,80mm,80mm,80mm,80mm
- Stem Length
- 35mm,35mm,50mm,50mm,50mm,50mm
- Seatpost Length
- 100mm,125mm,150mm,170mm,170mm,170mm
- Saddle Width
- 155mm,155mm,143mm,143mm,143mm,143mm
- Max Seatpost Insertion
- 220mm,220mm,240mm,260mm,280mm,300mm
- Handlebar Width
- 780mm,780mm,780mm,780mm,780mm,780mm
Wheels & Tires
- Rims
- Roval Control 240, hookless carbon, 29mm inner width, hand-built, 2Bliss Ready
- Rear Tire
- Purgatory, GRID casing, GRIPTON® T7 compound, 29x2.3"
- Front Hub
- DT Swiss 240, sealed cartridge bearings, 15x110mm spacing, 28h
- Rear Hub
- DT Swiss 240, Ratchet EXP, 36t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h
- Spokes
- DT Swiss Competition Race
- Front Tire
- Butcher, GRID casing, GRIPTON® T9 compound, 29x2.3"
- Seat Tube length
- 385mm,385mm,405mm,425mm,445mm,465mm
- Inner Tubes
- Standard, Presta Valve
- Top-tube Length (horizontal)
- 563mm,583mm,605mm,632mm,660mm,692mm
- Seat Tube Angle (High BB)
- 76.5°,76.5°,76.5°,76.5°,76.5°,76.5°
- Seat Tube Angle (Low BB)
- 76°,76°,76°,76°,76°,76°
Accessories
- Chainstay Length
- 432mm,432mm,432mm,432mm,442mm,442mm
- Trail (Low BB)
- 126mm,126mm,126mm,126mm,126mm,126mm
- Headtube Angle (Low BB)
- 65°,65°,65°,65°,65°,65°
- Trail (High BB)
- 123mm,123mm,123mm,123mm,123mm,123mm
- Stack (low BB)
- 614mm,613mm,622mm,632mm,641mm,650mm
- Headtube Length
- 95mm,100mm,110mm,120mm,130mm,140mm
- Bike Standover Height
- 730mm,734mm,744mm,749mm,757mm,757mm
- BB Drop (Low BB)
- 47mm,42mm,42mm,42mm,42mm,42mm
- Reach (low BB)
- 410mm,430mm,450mm,475mm,500mm,530mm
- Reach (High BB)
- 415mm,435mm,455mm,480mm,505mm,535mm
- Wheelbase
- 1152mm,1175mm,1200mm,1228mm,1268mm,1302mm
- Front Center
- 724mm,746mm,770mm,800mm,829mm,863mm
- BB Drop (High BB)
- 40mm,35mm,35mm,35mm,35mm,35mm
- BB Height (High BB)
- 335mm,340mm,340mm,340mm,340mm,340mm
- Stack (High BB)
- 610mm,609mm,618mm,627mm,636mm,646mm
- BB Height (Low BB)
- 328mm,333mm,333mm,333mm,333mm,333mm
- Headtube Angle (High BB)
- 65.5°,65.5°,65.5°,65.5°,65.5°,65.5°
Frame sizing
XS4'10"-5'2"
S5'2"-5'6"
M5'6"-5'10"
L5'10"-6'2"
XL6'2"-6'6"
M highlighted as most common resale size. Sourced from catalog metadata.
Geometry
- Stack
- Varies by size
- Reach
- Varies by size
- Wheelbase
- Varies by size
Industry standard. Sourced from catalog metadata.
What to check when buying used
Inspection
Drivetrain wear
Check chain stretch, cassette teeth, chainrings, and shifting under load before negotiating price.
Inspection
Wheel condition
Inspect rims, hubs, spokes, and bearing play; ask about the tire age and any prior wheel rebuilds.
Inspection
Service history
Ask for service records covering bearings, brakes, drivetrain, and any frame or fork warranty work.
Inspection
Suspension service
Confirm fork lowers and rear shock service intervals; ask for the most recent service receipts.
Inspection
Frame pivots & bearings
Cycle the suspension off the bike to feel for play, grit, or noise in pivot bearings.