Inspection
Frame condition
Inspect the frame, fork, welds, and high-stress areas for cracks, dents, or prior repairs.
Cannondale
2020 Cannondale SuperSix EVO Hi-MOD Disc Dura-Ace Di2
Previous used estimate
$3,106 - $3,195
Actual value depends on condition, size, and local demand.
Value Guide market data · 2020 Cannondale SuperSix EVO Hi-MOD Disc Dura-Ace Di2
12-month projected trend
11%
Direction and magnitude, not judgment
vs. category average
11%
Drops faster than category avg
Price over time - 2020 Cannondale SuperSix EVO Hi-MOD Disc Dura-Ace Di2
Values based on actual sales data. Enter your bike's specifics to get a precise valuation.
All SuperSix model years
Overview
About this bike
The SuperSix EVO is a road bike that represents the best possible blend of aerodynamics and low weight. Its advanced frame design features highly truncated airfoil tube shapes that offer the same weight, and equal or better stiffness, than round tubes, but reduce drag by up to 30%. The SuperSix EVO lineup has always been known for its elegantly smooth ride quality, and Cannondale's latest iteration is even smoother. The new SAVE rear stays, integrated binder, and 27 KNØT seat post increase compliance by 18%—a massive benefit that riders will certainly appreciate, especially on longer days. Cannondale's proprietary high-strength, high-stiffness carbon construction features an advanced matrix of intermediate modulus fibers that together create a frame that's light, durable, and lively. For additional comfort and capability on all kinds of roads, the SuperSix EVO will easily fit the largest tire size the brake caliper will allow (28mm for most brakes). Offering further aerodynamic improvements, the disc version has a unique design that routes the brake lines through an opening in the front of the headtube for minimal drag and headache-free serviceability. Considering every detail, the bike makes use of Speed Release dropouts that combine the benefits of added thru-axle stiffness and the convenience of a QR. The lightest disc brake road frameset Cannondale's ever made, the SuperSix EVO has a racy geometry and stiffness for explosive speed. - HollowGram SiSL2 crankset w/ Power2max NG Eco Power Meter - Shimano Dura-Ace Di2 drivetrain - HollowGram 45 SL KNØT wheelset
Specifications
- Subtype
- Performance
- Category
- Road
- Component Fork
- BallisTec Hi-MOD Carbon, SAVE, 1-1/8" to 1-1/4" steerer, integrated crown race, flat mount disc, internal routing, 55mm offset (47-54cm) 45mm offset (56-62cm)
- Component Hubs
- Front: HollowGram KNØT, sealed bearing 12x100 centerlock Rear: HollowGram KNØT, 12x142 centerlock w/ DT Swiss internals
- Component Size
- 48cm, 51cm, 54cm, 56cm, 58cm, 60cm, 62cm
- Component Stem
- HollowGram KNØT, alloy w/ cable cover, -6°
- Product Family
- SuperSix
- Component Axles
- Front: 12 x 100mm Speed Release Rear: 12 x 142mm Speed Release
- Component Chain
- Shimano Dura-Ace, 11-speed
- Component Color
- Black
- Component Frame
- BallisTec Hi-MOD Carbon, integrated cable routing w/ Switchplate, SAVE, PF30a, flat mount disc, integrated seat binder
- Component Brakes
- Shimano Dura Ace hydro disc, 160/140mm RT900 rotors
- Component Saddle
- Prologo Dimension Nack NDR, 143mm width, carbon rails
- Component Headset
- SuperSix, 1-1/4" lower bearing, 25mm top cap
- Component Cassette
- Shimano Dura-Ace, 11-30, 11-speed
- Component Crankset
- HollowGram SiSL2 w/ pre-installed power2max NG Eco Power Meter (not activated), BB30a, Vision rings
- Component Shifters
- Shimano Dura-Ace hydro disc, 2x11
- Component Handlebar
- HollowGram SystemBar SAVE, Carbon, 8 deg. pitch adjust
- Component Seat Post
- HollowGram 27 SL KNØT, carbon, 2 bolt clamp, 330mm
- Component Chainrings
- 52/36T
- Component Front Tire
- Vittoria Corsa, 700 x 25c
- Component Tape Grips
- Cannondale Grip Bar Tape w/Gel, 3.5mm
- Component Bottom Bracket
- Cannondale Alloy PressFit30
- Component Rear Derailleur
- Shimano Dura-Ace Di2
- Component Front Derailleur
- Shimano Dura-Ace Di2, braze-on
- Component Accessories Extras
- Cannondale Wheel Sensor
- Hubs
- Front: HollowGram KNØT, sealed bearing 12x100 centerlock Rear: HollowGram KNØT, 12x142 centerlock w/ DT Swiss internals
- Crankset
- HollowGram SiSL2 w/ pre-installed power2max NG Eco Power Meter (not activated), BB30a, Vision rings
- Bottom Bracket
- Cannondale Alloy PressFit30
- Chain
- Shimano Dura-Ace, 11-speed
- Saddle
- Prologo Dimension Nack NDR, 143mm width, carbon rails
- Handlebar
- HollowGram SystemBar SAVE, Carbon, 8 deg. pitch adjust
- Headset
- SuperSix, 1-1/4" lower bearing, 25mm top cap
- Front Derailleur
- Shimano Dura-Ace Di2, braze-on
- Rear Derailleur
- Shimano Dura-Ace Di2
- Stem
- HollowGram KNØT, alloy w/ cable cover, -6°
- Accessories & Extras
- Cannondale Wheel Sensor
- Axles
- Front: 12 x 100mm Speed Release Rear: 12 x 142mm Speed Release
- Brakes
- Shimano Dura Ace hydro disc, 160/140mm RT900 rotors
- Cassette
- Shimano Dura-Ace, 11-30, 11-speed
- Chainrings
- 52/36T
- Fork
- BallisTec Hi-MOD Carbon, SAVE, 1-1/8" to 1-1/4" steerer, integrated crown race, flat mount disc, internal routing, 55mm offset (47-54cm) 45mm offset (56-62cm)
- Frame
- BallisTec Hi-MOD Carbon, integrated cable routing w/ Switchplate, SAVE, PF30a, flat mount disc, integrated seat binder
- Seat Post
- HollowGram 27 SL KNØT, carbon, 2 bolt clamp, 330mm
- Shifters
- Shimano Dura-Ace hydro disc, 2x11
- Tape/Grips
- Cannondale Grip Bar Tape w/Gel, 3.5mm
- Color
- Black
- Size
- 62cm
- Front Tire
- Vittoria Corsa, 700 x 25c
What to check when buying used
Inspection
Drivetrain wear
Check chain stretch, cassette teeth, chainrings, and shifting under load before negotiating price.
Inspection
Service history
Ask for service records covering bearings, brakes, drivetrain, and any frame or fork warranty work.