Inspection
Frame condition
Inspect the frame, fork, welds, and high-stress areas for cracks, dents, or prior repairs.
SE Racing
2024 SE Racing Big Ripper 29"
Previous used estimate
$470 - $484
Actual value depends on condition, size, and local demand.
Value Guide market data · 2024 SE Racing Big Ripper 29"
12-month projected trend
15%
Direction and magnitude, not judgment
vs. category average
10%
Drops faster than category avg
Price over time - 2024 SE Racing Big Ripper 29"
Values based on actual sales data. Enter your bike's specifics to get a precise valuation.
All Big model years
2024$470 - $484Currently viewing
2023$445 - $458▼ 5% vs. 2024
2022$424 - $436▼ 10% vs. 2024
2020$225 - $231▼ 52% vs. 2024
2019$205 - $211▼ 56% vs. 2024
2018$155 - $160▼ 67% vs. 2024
2017$136 - $140▼ 71% vs. 2024
2016$117 - $120▼ 75% vs. 2024
2015$117 - $120▼ 75% vs. 2024
2014$110 - $113▼ 77% vs. 2024
2013$106 - $109▼ 77% vs. 2024
2012$103 - $106▼ 78% vs. 2024Compare Big Ripper 29" models
1 modelsChoose a different build or frame style to see its value.
Overview
About this bike
The PK Ripper was the raddest, baddest, and most famous bike during the first BMX boom in the early 80s. Fast forward 40 years to today and now it’s the 29" Big Ripper that’s on top during the Big Bike BMX boom. This Big Ripper frame comes equipped with an American bottom bracket and an OG seatstay wishbone plate just like the original PK Ripper. The 29" x 2.4" SE Bozack tires are just wide enough to give stability and cushion, but also roll extremely fast. Whether you are an old-school BMX rider reliving your youth or a new-school SE bike life rider raising it up, the Big Ripper is for you. - Retro 6061 aluminum Checkerboard Big Ripper frame with Floval tubing, looptail rear end, American bottom bracket, and classic PK - Ripper style wishbone plate - Full Cr-Mo Landing Gear forks - Cr-Mo Big Honkin' cruiser bars - Double-wall rims with sealed-bearing and high-flange hubs - SE 3-piece V-Ridge cranks with alloy SE sprocket - Authentic ODI Mushroom II grips - SE Bozack 29" x 2.4" tires - SE Flyer seat with SE bottle opener - SE padset (Tough Guy Tan does not include padset) - SE Wheelie pegs - 32 pounds
Specifications
- Category
- BMX
- Component Fork
- Landing Gear, Full Cr-Mo
- Component Size
- One Size
- Component Stem
- Retro Alloy Top-Load w/ Engraved SE Logo on Top & Sides, 55mm Reach
- Product Family
- Big
- Component Chain
- KMC S1
- Component Color
- Sapphire Blue, Deep Red, Tough Guy Tan
- Component Frame
- 6061 Aluminum Floval Tubing, Looptail Rear End, 68mm American Bottom Bracket, Wide Rear Stays, Retro Dropouts
- Component Brakes
- Tektro 855AL V-Brake, Slick Cable
- Component Pedals
- Wellgo Low-profile Platform
- Component Saddle
- SE Flyer Seat w/ Custom SE Bottle Opener Brace
- Component Headset
- Tange 1-1/8" Threadless
- Component Crankset
- SE V-Ridge 3-pc Cr-Mo Cranks, 175mm, Sealed American Bottom Bracket, 160mm Spindle Length, 19mm Spindle Diameter, 36T Alloy SE Racing Sprocket
- Component Seatpost
- Micro-Adjust Alloy, 27.2mm
- Component Handlebar
- Big Honkin' Cr-Mo Cruiser Bar, 29" x 7", 12° Backsweep, 2° Upsweep
- Component Rear Tire
- SE Bozack, Street Proven Multi Purpose Compound, Wrap Around Urban Tread Pattern, Grooved SE Wing Logo, 29" x 2.4" Front & Rear
- Component Wheel Set
- Sealed Bearing 36H High-Flange Alloy Flip Flop Hubs w/ Double-wall Rims, 16T Freewheel (Army Gray and Copper Feature 17T Freewheel), Stainless Spokes
- Component Front Tire
- SE Bozack, Street Proven Multi Purpose Compound, Wrap Around Urban Tread Pattern, Grooved SE Wing Logo, 29" x 2.4" Front & Rear
- Component Tape Grips
- Authentic ODI Mushroom II grips
- Component Wheel Size
- 29-inch
- Component Brake Levers
- Tektro 316A, 2-Finger Alloy
- Component Accessories Extras
- SE Padset (Tough Guy Tan does not include padset), Alloy Valve Caps, SE Wheelie Pegs
- Crankset
- SE V-Ridge 3-pc Cr-Mo Cranks, 175mm, Sealed American Bottom Bracket, 160mm Spindle Length, 19mm Spindle Diameter, 36T Alloy SE Racing Sprocket
- Pedals
- Wellgo Low-profile Platform
- Chain
- KMC S1
- Seatpost
- Micro-Adjust Alloy, 27.2mm
- Saddle
- SE Flyer Seat w/ Custom SE Bottle Opener Brace
- Handlebar
- Big Honkin' Cr-Mo Cruiser Bar, 29" x 7", 12° Backsweep, 2° Upsweep
- Headset
- Tange 1-1/8" Threadless
- Rear Tire
- SE Bozack, Street Proven Multi Purpose Compound, Wrap Around Urban Tread Pattern, Grooved SE Wing Logo, 29" x 2.4" Front & Rear
- Stem
- Retro Alloy Top-Load w/ Engraved SE Logo on Top & Sides, 55mm Reach
- Accessories & Extras
- SE Padset (Tough Guy Tan does not include padset), Alloy Valve Caps, SE Wheelie Pegs
- Brake Levers
- Tektro 316A, 2-Finger Alloy
- Brakes
- Tektro 855AL V-Brake, Slick Cable
- Fork
- Landing Gear, Full Cr-Mo
- Frame
- 6061 Aluminum Floval Tubing, Looptail Rear End, 68mm American Bottom Bracket, Wide Rear Stays, Retro Dropouts
- Tape/Grips
- Authentic ODI Mushroom II grips
- Color
- Tough Guy Tan
- Size
- One Size
- Wheel Size
- 29-inch
- Wheel Set
- Sealed Bearing 36H High-Flange Alloy Flip Flop Hubs w/ Double-wall Rims, 16T Freewheel (Army Gray and Copper Feature 17T Freewheel), Stainless Spokes
- Front Tire
- SE Bozack, Street Proven Multi Purpose Compound, Wrap Around Urban Tread Pattern, Grooved SE Wing Logo, 29" x 2.4" Front & Rear
What to check when buying used
Inspection
Drivetrain wear
Check chain stretch, cassette teeth, chainrings, and shifting under load before negotiating price.
Inspection
Service history
Ask for service records covering bearings, brakes, drivetrain, and any frame or fork warranty work.